How To Boost Wi-Fi Signal On Router without Antenna

Boost WiFi Signal On Router without Antenna

If you are experiencing a poor Wi-Fi connection, it may be caused by different factors. One of the common causes of slow internet is using an old router.

If you are having issues with your WiFi signal strength even after changing your router, there are specific steps you can take to boost your Wi-Fi signal.

Here is how to boost Wi-Fi signal on routers, including routes without antennas.

How to boost Wi-Fi signal on a router without antenna

The first thing you need to do is to ensure your router firmware is up to date. If the router is still running an outdated firmware version, you need to update it to the latest version to avoid weak signals.

It is also advisable to make use of Wi-Fi extenders to boost the Wi-Fi strength on your router. Here are the steps to boost your Wi-Fi signal with an extender using the Wi-Fi protected setup.

  • Place the extender next to your router within range.
  • Find the WPS button on the extender and press it continuously for at least 5 seconds.
  • This will prompt the Wi-Fi light on the extender to start blinking. Wait for 2 minutes.
  • Press the WPS button on the router and wait for another 2 minutes.
  • Once the extender is successfully connected to the network, the blinking light will turn solid.

It takes at least 2 minutes for the extender to establish a connection with the router. If the setup fails, try repeating the procedure.

Once the connection is complete, you can use the extender to connect to your network. You still use the same Wi-Fi password on your router to connect to the extender.

0ther ways to boost your Wi-Fi signal

Adjusting the settings on your router

From your computer or smart device, you can access the Wi-Fi network settings. All the networks listed are competing for airwaves in the network, which can slow down your Wi-Fi connection.

You can improve your Wi-Fi signal by migrating to a different channel.

From the windows store, download the Wi-Fi analyzer tool and install on your laptop.

This will take away the guesswork when working on your Wi-Fi settings. The analyzer finds interfaces caused by overlapping Wi-Fi signals on the same channel.

It will then let you know how you can change the channel.

Some routers come with built-in touchscreens that make it easy to switch to different channels without following a set of rules, as is the case with other routers.

Placing the router in a central position

The location of your router determines how far the signal can travel and the signal strength.

To boost signal strength in different areas, you can position the router in a central position. This will help to distribute the signal more evenly around your home or office.

Additionally, Wi-Fi routers require open space placement to be able to function at their best.

Place the router away from the wall and any obstructions that may interfere with the Wi-Fi signal. Keep the Wi-Fi router away from other appliances and electronics.

Running these devices too close to the Wi-Fi router can interfere with the signal.

Change the direction of the antenna.

If your router has external antennas, you can orient them in different directions to boost coverage. If possible, elevate the router by placing it on a shelf or mounting it high on the wall.

You can use tools that can help you visualize the signal coverage. This way, you get to know the weak and strong spots.

Check the frequency

From the network administrator, you can check that it is configured for the best performance.

For a dual-band router, you can switch to 5GHz for better throughout as opposed to the standard 2.4GHz band.

5GHz band offers faster internet speed and less interference from other devices and networks since it is not commonly used. It also handles distances well, ensuring wider coverage.

Kick out intruders

Sometimes, a slow Wi-Fi connection has nothing to do with the frequency or interference. If you have an open network or use a weak password, chances are some unwanted guests are using your connection.

When there are too many people on the network, it can cause overloading, which affects the speed and signal strength.

You can invest in tools that help you see how many devices are connected to your network.

You can also tell which devices are sucking up your bandwidth from the admin interface.

Once you realize there are too many unwanted users on your network, you can secure the connection by changing to a WPA2 security protocol and using a strong password.

Best Mesh Wifi Routers

Best Modem Router Combo

Best Netgear Router

Best Wifi Extenders for Home

How to Set Up Google Home Mini